How to Install a Showerhead

Project Overview

Swapping your showerhead is a quick and easy way to upgrade your shower routine. This project guide walks you through installing multiple kinds of showerheads. You'll also find instructions for removing an old showerhead if you need to do that first.

Skill Level: Beginner

Active Time: 30 min

Total Time: 30 min

Your Character Kit

Here are the supplies you'll find inside of your Showerhead Installation Kit:

Wide jaw adjustable wrench with jaw protectors

Thread seal tape

Wet wipes pack

Tips Before Getting Started

Safety first!

Close or cover your shower drain.

Old showerheads may be stuck in place.

Always hand tighten first before using the wrench.

Watch the Video

Scroll or click here for a step-by-step guide

Responsive Iframe Example with Smaller Max Width and Height

Project Glossary

Fixed Showerhead

Handheld Showerhead

Dual or Combo Showerhead

Shower Arm

Shower Arm Threads

Flat spot (or grooves) for gripping

Project FAQs

How much does it cost to install a showerhead?

Do I need to turn off the water valve or whole home water main?

Do I really need a wrench?

What do I use the thread seal tape for?

Let's Take It Step-by-Step

Step-by-step instructions on installing your showerhead.

Preparation

5 minutes

1. Gather your supplies

2. About your tools

Removing Your Old Showerhead

5 minutes

1. First, try removing your showerhead by hand

2. Use the wide-jaw adjustable wrench to remove the showerhead

3. Clean the shower arm threads using the wet wipes

Installing Your Fixed Showerhead

10-20 minutes

1. Review your new showerhead's installation manual

2. Seal the showerhead connection using thread seal tape

3. Screw the showerhead onto the shower arm

4. Use the wide-jaw adjustable wrench to tighten the connection

5. Turn on the water and check for leaks

Congratulations!

Installing Your Handheld Showerhead

10-20 minutes

1. Review your new showerhead's installation manual

2. Seal the showerhead connection using thread seal tape

3. Screw the handheld showerhead mount onto the shower arm

4. Use the wide-jaw adjustable wrench to tighten the connection

5. Connect the shower hose

6. Turn on the water and check for leaks

Congratulations!

Installing Your Dual or Combo Showerhead

10-20 minutes

1. Review your new showerhead's installation manual

2. Seal the showerhead connection using thread seal tape

3. Screw the diverter onto the shower arm

4. Use the wide-jaw adjustable wrench to tighten the connection

5. Connect the fixed-mount showerhead to the diverter

6. Attach the handheld head mount

7. Connect the shower hose

8. Turn on the water and check for leaks

Congratulations!