How to Install a Single Handle Faucet

Project Overview

This project guide walks you through installing a single handle faucet with or without a sprayer. You'll also find instructions for removing an old faucet if you need to do that first.

Skill Level: Intermediate

Active Time: 1 hour

Total Time: 1 hour

Your Character Kit

Here are the supplies you'll find inside of your Faucet Kit.

Basin wrench

Plumber's putty

Thread seal tape

Mircrofiber rags

Wet wipes pack

Drip Tray

You May Also Need:

Depending on your current faucet and your sink, you may also need an adjustable wrench and a screwdriver.

Adjustable wrench

Tips Before Getting Started

Safety first!

Make sure your new faucet fits your sink.

Kitchen sinks may need a spray nozzle or soap dispenser.

Remove anything in the way of your plumbing.

Check for an electrical outlet under your sink.

Find a friend to help out!

Watch the Video

Scroll or click here for a step-by-step guide

Responsive Iframe Example with Smaller Max Width and Height

Project Glossary

Mounting Holes

Water Supply Lines

Spread

Escutcheon

J Bend or P Trap

Angle stops or shut off valves

Drain Pipe

Project FAQs

How do I know if my single handle faucet's escutcheon is covering multiple mounting holes?

Can I install a single hole faucet in a multiple hole sink?

Can I install a widespread or two handle faucet in a single hole sink?

Is installing a kitchen faucet difficult or risky for my plumbing system?

How much does it cost to install a faucet?

What is the difference between a sink and a faucet?

Why do I need a basin wrench?

What do I use the plumber’s putty and thread seal tape for?

Let's Take it Step-by-Step

Step-by-step instructions on installing your faucet.

Preparation

10-20 minutes

1. Clean out under your sink

2. Gather your supplies

3. About your tools

4. Turn off electricity

5. Turn off water supply

6. Remove old Faucet (if needed)

Installing Your New Faucet

30 - 40 minutes

1. Review your new faucets installation manual

2. Remove retaining nut

3. Place Faucet from top of sink

4. Secure with retaining nut

5. Connect the water supply lines

6. Install Sprayer (if you have one)

7. Installing a new drain and drain plug as well?

8. Turn water back on

Congratulations!